Keeping your pool maintained throughout the year is a difficult task. However, keeping it clean in winter, you use a pool cover to prevent debris from falling into the water.
Yet, it seems like all the water and leaves accumulate on top of the cover, making it difficult to remove and clean. The job is annoying, and you do not want the dirty water to end up in the pool.
So how do you remove all the grime and dirty water from the pool cover? You invest your money in the best pool cover pump for the best results.
With the pump, you can remove excess water and leaves to prevent the dirt from ending up in the pool. Not only can you use the pump for keeping the pool cover maintained, but you could also set it up for other purposes to keep a fountain clean as well.
Go ahead and check these units out today, and with the help of the buying guide at the end, find a suitable one for your needs.
Table of Contents
Take a Look at the Best Pool Cover Pumps List:
Best Pool Cover Pump Reviews
10. Wayne 57729-WYNP WAPC250 Pool Cover Pump
Using the pool cover pump from Wayne is effortless with the auto on/off the design. The maximum water flow rate is 3000 GPH.
You can use it with a one and a ¼-inch drain hose and comes with a check-valve and ¾ -inch adapter on the tube to help reduce cycling.
The unit has a long power cord with a 25-foot rope to position the pump on the cover. The siphon has a protection circuit to prevent a locked impeller from debris and automatically shuts down.
Pool Cover Pump at a glance:
- ¼ HP pool cover pump with auto on/off
- Senses the presence of water and switches on/off
- Designed with strainer base to filter out debris
- Fabricated as an energy-efficient oil-free pump with a high flow of 3000 GPH
- Fitted with auto freeze protection
What we like:
- Minimal assembly
- Helpful customer service
- Works quietly
- Kicks in when it reaches a couple of inches of water automatically
What we do not like:
- The check-valve and motor housing is made separately and does not align and best used with some Teflon tape
9. Little Giant APCP-1700 Automatic Swimming Pool Cover Submersible
Here we have a powerful pump for pool covers with a 270-wattage with a 23-feet heat and screened intake. The housing has a glass-filled polypropylene structure with a NITRILE shaft seal and weighs around 14-pounds.The pool cover pump works with low energy use with FNPT discharge and long power cord. The unit activates in two inches of water and automatically deactivated as well.
The base has extensive construction and has a liquid temperature display as well. You can use it to remove water and debris easily from the pool cover.
Pool Cover Pump at a glance:
- Has a removable intake screen
- Built-in carrying handle
- Works with a ¾-inch garden hose connection
- Fitted with a 25-foot power cord
- Included float switch for auto operation
- Designed with side discharge
- Three-year Warranty
What we like:
- Easy setup
- Works fast
- Does not clog up easily
- Quiet
- Auto start and stop
What we do not like:
- A bit heavy
- Limited Stock
8. Homasy 400GPH Submersible Pump 25W Ultra Quiet Fountain
Whether you need a pump for a pool cover or a fountain, the HOMASY has a submersible design to remove water and debris fast. The unit has a 25W pure copper motor with a lift height up to 6.9-feet.There is an adjustable water-flow rate control to get the desired water pressure with a flow rate of 400GPH. The suction is secure with the four suction cups and adsorbed on surfaces fast in a fountain or fish tank as well.
You get optional nozzles with a flexible power cord with a full application.
Pool Cover Pump at a glance:
- Fitted with a 25W pure copper motor with a lift height up to 6.9-feet
- Adjustable water flow with a max flow rate of 400GPH
- Has four suction cups to install horizontal or vertical
- Comes with two nozzles to work with different threaded fittings
- Fitted with a 5.9-foot power cord
- Broad base to use in hydroponic systems, fountains, and more
What we like:
- Value for money
- Submersible
- Excellent customer service
- The manufacturer stands behind their product
What we do not like:
- Quality Concerns
7. FibroPool Electric Swimming Pool Winter Cover Drain Pump
The pool cover pump has a durable ABS housing to resist elements outdoors and expands the use of the unit as well. The unit pumps up to 600-gallons per hour and will help you remove the water fast of the pool cover.The pump is designed to be used in the ground and above the ground with a lightweight chassis. There is a 16-feet power cord and works with any 110V wall outlet.
Furthermore, it comes with a 22-foot hose with a kink-proof design and has a manual shut off.
Pool Cover Pump at a glance:
- Made with a 75W motor with manual shut off
- Fitted with a 16-foot power cord plug
- You get a 22-foot hose with kin-proof design
- The pump rate is up to 600 gallons per hour
- Can use it in the ground or above the ground
What we like:
- Affordable
- Durable design
- Drains water at a decent rate
- Versatile to use
- Long enough hose
What we do not like:
- Would help if the pump was a bit bottom-heavy to prevent it from falling on the side
6. Superior Pump 91250 Utility Sump Pumps
The ¼ HP Thermoplastic Pumps, you can use for different purposes. The unit has a copper motor winding with a stainless steel shaft seal.
There are double-o-ring seals found on the motor plate and controlled with electronic split capacitors. The unit moves water up to 1800 gallons per hour and suitable for larger pool covers to remove water.
Furthermore, it has a suction screen to filter out debris, and it is UL/CUL Listed and CSA Certified.
Pool Cover Pump at a glance:
- ¼ HP pump to remove up to 1800 gallons per hour with a vertical height lift to 25-feet
- Made with a thermoplastic structure
- Fitted with a ten-foot cord
- Has a one and a ¼ -inch NPT discharge
- You get a ¾ -inch garden hose adapter
- Made with removable suction screen and carrying handle
- UL/CUL Listed and CSA Certified
What we like:
- Offers high performance in a small package
- Superior pump and does the job well
- Durable design
What we do not like:
- None Noted
5. Superior Pump 91330 1/3 HP Thermoplastic Submersible Utility Pump
As with the previous Superior Pump, this model also has a reliable copper motor winding with stainless steel shaft seals. You get a ⅓ HP submersible pump fitted with a ten-foot power cord.
Furthermore, you get a ¾ -inch hose adapter to shift water up to 2400 GPH. Moreover, it comes with a suction screen filter to handle debris with ease.
The stand of the unit fits the center of a standard six-inch floor drain as well. On the other hand, the pumps UL & CUL listed and CSA certified.
Pool Pump Cover at a glance:
- Made with ⅓ HP to move 2400 gallons per hour
- Has a vertical lift up to 25-feet
- Made with thermoplastic housing
- Fitted with a ten-foot cord
- Offers you a one and a ¼ -inch NPT discharge
- You get a ¾ -inch hose adapter
- Has a removable suction screen filter
- One-year Warranty
What we like:
- Costs less to purchase than rent
- Drains water fast
- Can use it with a pool supply hose as well
- Available in different sizes
What we do not like:
- None Noted
4. Little Giant 14942702 PCP550 Pool Cover Pump
The pool cover pump from Little Giant can remove up to 550 gallons per hour and has a removable intake screen as well. You get a ¾ -inch hose connection with a twenty-five-foot power cord.
The unit works manually to remove standing water and works well for transferring household water as well. Installing the pump is a breeze out of the box.
Furthermore, it will help to protect your pool cover to extend its use.
Pool Cover Pump at a glance:
- Manual pool cover pump to remove water from the pool cover and household water as well
- Made with thermoplastic design with removable intake screen
- Has a long 25-foot power cord that pumps up to 550 GPH
- Installs with a ¾ -inch hose connection
- One-year Warranty
What we like:
- Nice filter basket
- Durable design
- Removes water fast
What we do not like:
- Manual operated and not auto on/off
3. Little Giant 5-APCP Automatic Pool Cover Pump
The pool cover pump has a 380W voltage with 115V horsepower to help reduce your maintenance time. The unit has a versatile design with a stabilizing cover and auto-switch.
The stabilizing plate is removed to use it with other applications as well. Furthermore, the pump is submersible as well to work manually or automatically.
So invest in this pump for pool cover today to make sure the pool cover lasts longer.
Pool Pump Cover at a glance:
- Made with manual and auto function
- Submersible design and comes with garden hose adaptor
- CSA Listed with a 25-foot power cord
- Removes water up to 1200 GPH at one foot
- Removable stabilizing plate
- Automatic switch you can remove as well
- Two-year Warranty
What we like:
- Works with a powerful suction
- High-quality construction
- Manual or auto function
- Removable stabilizing base
- Versatile to use with other applications as well
What we do not like:
- Limited Stock
2. WAYNE WWB WaterBUG Submersible Pump with Multi-Flo
The pool cover pumps are ideal for unyielding spaces, and you can use it to remove water from laundry tubs, buckets, window wells, and more.
You get a side discharge for ease of removing water when used on flat surfaces in flooded basements and more. The max head takes out water down to one and sixteen inches.
Furthermore, it has a suction strainer filter to minimize clogs.
Pool Cover Pump at a glance:
- Offers multi-flow technology
- Suitable for tight spaces with the top discharge
- Designed with side discharge for use on flat surfaces
- Fitted with a 30-foot max head with a maximum flow rate of up to 1257 GPH
- Made with corrosion-resistant brass discharge outlets and cap seals
What we like:
- Powerful suction
- Cleans easily
- Reasonable price
- Has both top and side discharge
What we do not like:
- Not as powerful as other pool cover pumps
1. EDOU 850 GPH Swimming Pool Cover Pump Above Ground
With the EDOU pump, you can remove standing water on the pool cover and other household water transfer applications. The powerful motor has a high flow to remove water at 850 gallons per hour and works quietly.
You get the pump, a drain hose, and three different hose adapters. Included is a kin-proof hose and has a power cord length of 25-feet.
The durable copper motor provides stable operation to help reduce energy consumption at the same time.
Pool Cover Pump at a glance:
- Made for above ground use
- 75W drain pump to move up to 850 gallons per hour
- Durable ABS casing with a manual shut-off
- Built-in temperature control
- Fitted with a 16-feet kink-proof drain hose
- Comes with two added hose adapters
- Equipped with a 25-foot power cord
What we like:
- Powerful
- Reliable
- Does not fall over when pumping out water
- Encased electrical components
- Works with a standard garden hose fitting
What we do not like:
- None Noted
Pool Cover Pump Buying Guide
Now that we have looked at some of the top-selling pool cover pumps available let us talk about the essential features to consider when you buy one.
What do you prefer, a manual or automatic model?
You can buy two types of pumps for pool covers, an automatic and manual one. The auto unit senses there is too much water and will start pumping it out. With the manual pump, you will have to turn the unit on to work. However, you can find a siphon for pool cover use with both functions available as well.
The Size
For a small pool, you do not need a massive pump as it may fall into the water on the cover when used. Therefore, the size and weight play an important part when you select the right one.
The Speed
You can buy the pool cover pump with different pump speeds from rapid suction to others making a slow drip. Therefore, keep this mind when purchasing one on the list. If you find water buildup continuously on the cover, it helps to have a pump with reasonable speed to remove the water.
Hooking up the Hose
You can find different brands selling the pool cover pump with a hose attached, but some models do not come with one. Here, the crucial thing is to check how the water will exit the cover to make sure you have the right equipment on hand. You may find some models offering you different hose adapters included.
The Length of the Power Cord
The majority of the pool cover pumps reviewed works with electricity and comes with a power cord. You can buy a unit with a 30-foot long to a 16-foot long cord. Therefore, check where the power outlet will be when using the pump.
Final Thoughts
While selecting a pool cover pump looks simple, it can affect the way you use it during the winter or summer. Therefore, choosing the wrong unit will leave you with loads of challenges you want to avoid.
We hope that the buying guide and reviews help you to find the right model to make sure your pool cover remains in a tip-top condition throughout the year.